9.5 Machined Blocks

>Shipping Charge is TBD.  It is based on type of location - business, terminal pick up or residential delivery. Please contact Nicole@fordstrokers.com for a quote. 

• ANY Bore size you want. 4.00-4.030-4.040-4.060-4.125-4.155, or any bore size you specify
• You choose which block - Dart, Ford Boss, Summit or World Man-O-War
• Bored on Kwikway Boring Bar
• Torque Plate Honed on Sunnen CV-616 Hone, finish honed to within .0001-.0002 out of round and taper
• Surfaced with BHJ block fixture on DCM Tech HB3810 Surfacer (8-12 Ra Finish) ANY deck height you specify. Ability to use ANY MLS head gasket
• Main Bearing Bores Align Honed on Sunnen Ch-100 Hone (.0001-.0002 taper)
• Stroker Clearanced 
• Camshaft Bearings Installed
• Deep Freeze Plugs Installed
• Screw In Oil Galley Plugs Installed
• ARP Main Studs installed
• Painted ANY color you wish - http://duplicolor.com/product/engine-enamel-with-ceramic
• Completely ready to assemble

>>We will need you to either send in your pistons so we can measure, email us the skirt measurements or give us a final hone number<<